|
|
IM-2
Model IM-2 Foot Operated Underpinner is designed for low to medium
production requirements primarily where compressed air is not available and
a low purchase cost is necessary. Machine is free-standing and is operated
solely by downward pressure against a foot operated pedal leaving the
operator's hands free to hold the moulding. The mechanical advantage of the
foot petal is that it requires only light foot pressure by the operator to
press the nails into most types of material, even hardwoods. This machine is
capable of single or stacked nails to suit most moulding profiles.
* Small, Compact Design - Uses minimal floor space
* No compressed Air or Electricity Required
* Quiet Operation - Ideal for low noise areas
* Lightweight - UPS Shippable
|
Dimensions:
L-10' W-10' H- 42-1/2"
Table Size:
10" x 13-3/4"
Weight: 50lbs
Production Capacity:
400-500 Frames Per
8 Hour Shift |
|
 |
IM-3
* Small, Compact Design - Uses minimal floor space
* No compressed Air or Electricity Required
* Quiet Operation - Ideal for low noise areas
* Heavier Frame Construction than the IM-2
* UPS Shippable
|
Dimensions:
L-10" W-10" H-42-1/2"
Table Size:
10" x 13-3/4"
Weight: 51 lbs
Production Capacity:
400-500 Frames Per
8 Hour Shift |
|
 |
IM-3P
Quick & Easy V-Nail Change
Simple Cleaning
Adjustable Foot Pedal
Force of V-Nails defined by the operator
Acrylic Guard |
Dimensions:
L-15" W-14-13/16" H-42-1/2"
Table Size:
10" x 13-3/4"
Weight: 51 lbs
Production Capacity:
1100-1500 Frames Per
8 Hour Shift |
|
 |
IM-300PL The IM-300PL slices with
absolute precision giving a perfect 45 degree mitered piece - in both wide
and narrow profiles. By choosing the proper blade, you may cut raw and
finished wood, plastic or aluminum.
Includes:
2 Blades - 96 tooth carbide teeth for wood cutting
72" Accurate Measure Gauge
Dust Collector
Chip Collector
Left Side Moulding Support
Features:
Adjustable speed of the blade descent Easy front panel access for changing
blades Moulding hold down High powered dust collector Exhaust with filter
for dust collection Ability to cut left or right side blade only or
simultaneously
|
Specs:
Saw Blades: 12" external, 1" bore
Saw Motor: (2) motors @ 1-1/2 hp 3400 rpm, 220v
Exhaust Motor: (1) motor @ 3/4 hp 3400 rpm, 220v
Overall Size: 47" x 5.9" x 23-5/8"
Weight: 533lbs
Cutting Specifications: 5-5/8" width x 3-3/16" height |
|
 |
For use with the IM-2 Manual Underpinner |
275 V-Nails in each cartridge
6 cartridges per box |
|
 |
For use with the IM-3 & IM-3P |
Box Quantity Varies |
